The publication of this final report concludes the expedited consultation procedure conducted by AEMO in respect of the proposal to undertake the amendments to the following documents, effective 1 September 2024, to remove the NSW jurisdictional metrology material related to controlled load profiles under the National Electricity Rules:
- Metrology Procedure: Part A.
- Metrology Procedure: Part B.
- MSATS Procedures: MDM Procedures.
- MSATS Procedures: CATS Procedure.
- Standing Data for MSATS document.
AEMO thanks all stakeholders for their responses during the Consultation.
Final Report
Procedures (Change Marked)
-
30/05/2024
Metrology Procedure Part A v7.7 (Change Marked)
457.82 KB -
30/05/2024
Metrology Procedure Part B v7.7 (Change Marked)
928.97 KB -
30/05/2024
MSATS Procedures - CATS v5.8 (Change Marked)
2.66 MB -
30/05/2024
MSATS Procedures - MDM Procedure v4.6 (Change Marked)
611.78 KB -
30/05/2024
Standing Data for MSATS v5.8 (Change marked)
1.03 MB
Procedures (Clean)
Participant Feedback
Procedures (Change Marked)
-
11/04/2024
Metrology Procedure Part A v7.7 (Change Marked) - Draft
457.28 KB -
11/04/2024
Metrology Procedure Part B v7.62 (Change Marked) - Draft
925.94 KB -
11/04/2024
MSATS Procedures CATS v5.8 (Change Marked) - Draft
2.57 MB -
11/04/2024
MSATS Procedures MDM Procedure v4.6 (Change Marked) - Draft
598.44 KB -
11/04/2024
Standing Data for MSATS v.58 (Change marked) - Draft
1 MB